|
| |
| |
| Sizes: |
Volume: |
| |
|
| 3.33" x 3' |
5100mL |
| 1.5" x 7' |
2392mL |
| 1.5" x 4' |
1367mL |
| 1.5" x 3' |
1025mL |
| 1.5" x 1' |
342mL |
| |
|
| .70" x 4' |
270mL |
| .70" x 3' |
200mL |
| .70" x 1' |
67mL |
| |
|
| .46" x 4' |
110mL |
| .46" x 3' |
85mL |
| |
|
| |
|
|
Benefits:
- PVC naturally sinks in water, due to its specific gravity,
relative to water.
- No weights to restrict flow of sample entering and exiting
bailer.
- PVC is very ridged, stays straight, never bending or distorting
under normal care. (This is very important for the smaller
diameter .45 inch and .70 inch bailers, which are carefully extruded
for straightness).
- Material is clear, to assist in field sampling, that may
require visual inspection of the sample taken. (Actually see
the product sampled from ground water remediation wells and
fuel tanks, for example).
- Tested and approved, by established legal environmental
testing firm, for leaching, absorption and over all performance.
Results came in with A+ ratings for areas tested. Tested under
Methods 8260 & 8260B
Material:
- Tubing:
- Virgin medical grade Poly Vinyl Chloride. (Same medical grade
PVC resin used in the manufacturing of catheters, for treatment
of medical patents.)
Specially
Designed Tops:
- Allowing samples to be poured accurately, with little or no
splashing
- Strong ridged tethering attachment for secure fastening of
bailer rope
- Each part is press fitted and double welded, to assist in the
bonding of tube to top device.
Specially
Designed Bottoms:
- Redesigned ball seat helps to deter sticking of ball, with
out sample loss, between ball and device.
- Large .65 inch opening allowing for large volumes of product
to rapidly fill the bailer with minimal disturbance to the sample.
Also speeds up sampling and or purge time, thus saving money.
- Each part is press fitted and welded, for little or no leaking
between tube and bottom device.
|
